Safety Helmet With Protective Peak, Ventilators and Ratchet Type Adjustment, PN542 - Product Detail - Karam
Safety Helmet With Protective Peak, Ventilators and Ratchet Type Adjustment, PN542
Study and Stylish design for excellent head protection. This high quality product provides protection against impact, while giving special attention at the design that ensures maximum visibiity and wearer comfort.
- Protective peak with Reinforced Ribs profile
- Has increased vertical clearance, along with the crown-cooling vents for increased airflow.
- Robust design Deflectors on the crown reduces impact of falling object and distributes the impact evenly to prevent injuries
- Comes with Ventilated slots which can be opened/closed with the help of a shutter
- Safety Helmet is designed to provide utmost protection to the head in high-risk environments like construction sites, industries, workshops, roadsides, etc
|Shelf Life||3 Years||Certification||EN 397: 2012 + A1:2012|
|Material||Polypropylene Copolymer||Warranty||1 Year from the date of Invoice against any manufacturing defect.|
|Country Of Origin||India||Product Weight||400 gm|
|Dimension||165 MM*297 MM*220 MM||Ventilation Slots||yes|
A helmet certified to either EN 397:2012+A1:2012 or IS 2925:1984 is tested for various stress parameters defined in these standards which help the users with effective protection.
Safety Helmets can be certified to EN 397:2012+A1:2012 (European), IS 2925:1984(Indian) and ANSI/ISEA Z89.1-2009(American) Standards
As a general guideline, most hard hat manufacturers recommend replacing hard hats every five years regardless of outside appearance. If you work under extreme conditions, such as exposure to high temperatures, chemicals,or sunlight, hard hats should be replaced after two years of use
Nothing, as it can reduce the effectiveness of a safety helmet.
Helmet should adhere to the following colour scheme on sites : White - for site managers, competent operatives and vehicle marshalls Black - for site supervisors. Orange - for slingers and signallers. Blue - for all other site visitors.
According to OSHA It is recommended not to use adhesives or stickers on Safety Helmet unless you receive specific approval by the manufacturer
As per OSHA, safety helmets sohuld be worn the way they were designed
unless the manufacturer certifies that a it can be worn backward.
You can clean your safety helmet with lukewarm soapy water and soft cloth. If your helmet remains filthy, replace it. Using dissolvent for cleaning is not recommended.
In general terms the helmet should be replaced every three years based upon industry testing,however to maintain the helmet, the complete head harness insert must be replaced every two years.
Some customers elect to replace the entire helmet at this time or sooner dependent on its overall condition.
Safet Helmets should be cleaned with warm water and soap, on a regular basis. It must be stored in a clean dry area away from sunlight, not subjected to extremes of heat, cold or humidity.
Replace the Helmet immediately, if it is cracked, dented or shows any signs of wear and tear